Re: Script returns an error in version 10

[David Jacobowitz]

Riki Yamakawa,

Did you ever get an answer to your question?

I am seeing the same error in SPSS 14, but not in SPSS 13, when I run
Fabrizio's SyntaxScript:
http://pages.infinit.net/rlevesqu/Scripts/Utils/SyntaxScript.txt

Thanks
David Jacobowitz
[hidden email]

On Wed, 19 Apr 2000 19:03:53 +0900, riki yamakawa <[hidden email]>
wrote:

>Hello,
>
>A while ago, I remember seeing a question about a script that was working
>under earlier version returning an error under version 10.  I'm having the
>same problem in that the script was working fine under version 9, but I'm
>getting the following error messages when I run it under version 10.
>
>"Sax Basic was not properly terminated Some system resources may not be
>released Please correct your Query Unload event(s)"
>
>and
>
>"The processor has terminated due to an unrecoverable error at
>0x64cd6f95 -fetching from 0x00000079".
>
>Can anyone help me with what could cause these error messages and/or what I
>need to check?
>
>Thank you in advance,
>Riki Yamakawa

[King Douglas]

Folks,

  The nifty Export to PDF function in my copy of SPSS 15 has developed a stubborn streak.  I have 40 tables, each representing an airport served by American Airlines, e.g., ABQ, ATL, BDL, BNA, BOS, etc.

  The Export to PDF function creates one document with 40 tables, each with a hyperlink (Bookmark) on the left, so one can easily move between tables.  This doesn't work anymore.  Instead, when I click on BOS, for instance, I get BNA.  If I click on BNA, I get BDL, and so forth...always the preceding table.

  I've tried variations on my Table Look and my SPSS page setup and always get the same result.

  Any ideas out there?

  King Douglas
  American Airlines Customer Research

[Beadle, ViAnn]

Do you have more than one table per page?

-----Original Message-----
From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of King Douglas
Sent: Tuesday, February 13, 2007 11:41 AM
To: [hidden email]
Subject: SPSS 15 Export to PDF problem

Folks,

  The nifty Export to PDF function in my copy of SPSS 15 has developed a stubborn streak.  I have 40 tables, each representing an airport served by American Airlines, e.g., ABQ, ATL, BDL, BNA, BOS, etc.

  The Export to PDF function creates one document with 40 tables, each with a hyperlink (Bookmark) on the left, so one can easily move between tables.  This doesn't work anymore.  Instead, when I click on BOS, for instance, I get BNA.  If I click on BNA, I get BDL, and so forth...always the preceding table.

  I've tried variations on my Table Look and my SPSS page setup and always get the same result.

  Any ideas out there?

  King Douglas
  American Airlines Customer Research

[King Douglas]

Hi, ViAnn,

  The problem occurs when I create one table per page, landscape format.  After posting this, I unintentionally managed to created a PDF document in which the links work, in portrait format, two tables per page, using the same SPSS output document.

  Thanks for responding...any suggestions?

  King


"Beadle, ViAnn" <[hidden email]> wrote:
  Do you have more than one table per page?

-----Original Message-----
From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of King Douglas
Sent: Tuesday, February 13, 2007 11:41 AM
To: [hidden email]
Subject: SPSS 15 Export to PDF problem

Folks,

The nifty Export to PDF function in my copy of SPSS 15 has developed a stubborn streak. I have 40 tables, each representing an airport served by American Airlines, e.g., ABQ, ATL, BDL, BNA, BOS, etc.

The Export to PDF function creates one document with 40 tables, each with a hyperlink (Bookmark) on the left, so one can easily move between tables. This doesn't work anymore. Instead, when I click on BOS, for instance, I get BNA. If I click on BNA, I get BDL, and so forth...always the preceding table.

I've tried variations on my Table Look and my SPSS page setup and always get the same result.

Any ideas out there?

King Douglas
American Airlines Customer Research

[Jamie Burnett-3]

Hi,

I am currently trying to produce a table of partial correlations using
the OMS in SPSS 15. At present it is outputting the significance and DF
information from the table as well as the partial correlation, is it
possible to suppress this information and just output the correlation
value?

Many Thanks


Jamie Burnett




============================
This e-mail and all attachments it may contain is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of Ipsos MORI and its associated companies. If you are not the intended recipient, be advised that you have received this e-mail in error and that any use, dissemination, printing, forwarding or copying of this e-mail is strictly prohibited. Please contact the sender if you have received this e-mail in error.

Market & Opinion Research International Ltd , Registered in England and Wales No. 948470 , 79-81 Borough Road , London SE1 1FY, United Kingdom , VAT Registration No. 44393215, Email: [hidden email]
============================

[Mike P-5]

I can't off the top of my head remember what the table looks like, but
if all the information is contained in one table the simple answer is
no,

However, there are two ways to get around this, you could suppress them
with the aid of an autoscript, for partial correlation, or you could
depending on your needs write some syntax to delete them after they are
produced

Mike

-----Original Message-----
From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of
Jamie Burnett
Sent: 14 February 2007 11:18
To: [hidden email]
Subject: Query : Output Management System in SPSS

Hi,

I am currently trying to produce a table of partial correlations using
the OMS in SPSS 15. At present it is outputting the significance and DF
information from the table as well as the partial correlation, is it
possible to suppress this information and just output the correlation
value?

Many Thanks


Jamie Burnett




============================
This e-mail and all attachments it may contain is confidential and
intended solely for the use of the individual to whom it is addressed.
Any views or opinions presented are solely those of the author and do
not necessarily represent those of Ipsos MORI and its associated
companies. If you are not the intended recipient, be advised that you
have received this e-mail in error and that any use, dissemination,
printing, forwarding or copying of this e-mail is strictly prohibited.
Please contact the sender if you have received this e-mail in error.

Market & Opinion Research International Ltd , Registered in England and
Wales No. 948470 , 79-81 Borough Road , London SE1 1FY, United Kingdom ,
VAT Registration No. 44393215, Email: [hidden email]
============================

________________________________________________________________________
This e-mail has been scanned for all viruses by Star. The
service is powered by MessageLabs. For more information on a proactive
anti-virus service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________

[Reutter, Alex]

Hi Jamie,

Try adding

  /FORMAT=CONDENSED

to your PARTIAL CORR syntax.

Alex


-----Original Message-----
From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Jamie Burnett
Sent: Wednesday, February 14, 2007 5:18 AM
To: [hidden email]
Subject: Query : Output Management System in SPSS

Hi,

I am currently trying to produce a table of partial correlations using
the OMS in SPSS 15. At present it is outputting the significance and DF
information from the table as well as the partial correlation, is it
possible to suppress this information and just output the correlation
value?

Many Thanks


Jamie Burnett




============================
This e-mail and all attachments it may contain is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of Ipsos MORI and its associated companies. If you are not the intended recipient, be advised that you have received this e-mail in error and that any use, dissemination, printing, forwarding or copying of this e-mail is strictly prohibited. Please contact the sender if you have received this e-mail in error.

Market & Opinion Research International Ltd , Registered in England and Wales No. 948470 , 79-81 Borough Road , London SE1 1FY, United Kingdom , VAT Registration No. 44393215, Email: [hidden email]
============================

[Jason Burke]

If your OMS destination is an SPSS file, when reading the dfata file
created by OMS use the /KEEP subcommand to specify only the dimensions
that interest you.

If the destination is HTML or text, a script will not help since the
script impacts only what is displayed in the Viewer. OMS is provided
content directly from the proceedure and is not reliant on the Viewer
at all.

If the destination is XML, then a stylesheet transformation language
(XSLT) should help.

Cheers,


Jason

On 2/15/07, Reutter, Alex <[hidden email]> wrote:

> Hi Jamie,
>
> Try adding
>
>  /FORMAT=CONDENSED
>
> to your PARTIAL CORR syntax.
>
> Alex
>
>
> -----Original Message-----
> From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Jamie Burnett
> Sent: Wednesday, February 14, 2007 5:18 AM
> To: [hidden email]
> Subject: Query : Output Management System in SPSS
>
> Hi,
>
> I am currently trying to produce a table of partial correlations using
> the OMS in SPSS 15. At present it is outputting the significance and DF
> information from the table as well as the partial correlation, is it
> possible to suppress this information and just output the correlation
> value?
>
> Many Thanks
>
>
> Jamie Burnett
>
>
>
>
> ============================
> This e-mail and all attachments it may contain is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of Ipsos MORI and its associated companies. If you are not the intended recipient, be advised that you have received this e-mail in error and that any use, dissemination, printing, forwarding or copying of this e-mail is strictly prohibited. Please contact the sender if you have received this e-mail in error.
>
> Market & Opinion Research International Ltd , Registered in England and Wales No. 948470 , 79-81 Borough Road , London SE1 1FY, United Kingdom , VAT Registration No. 44393215, Email: [hidden email]
> ============================
>