spss/de-1993 version
Locked
 
|
Hi all:
I have a very old MSDos version of SPSS-data entry, try to install in my new PC which is running Vista. Installation procedure is fine, except that when I try to click on SPSSDE.EXE, I got a message saying that it is not a valid WIN32 application. Is there any way that I can make it work? In my other older PC, usually, I go to MSDos, then type: SPSSPC/DE then it will bring up the SPSS data entry screen but it doesn't work on this newer PC. Thank you very much. Linda |
|
|
rename the file to pasw.exe
On Thu, Apr 9, 2009 at 10:55 PM, lscfung <[hidden email]> wrote: > Hi all: > > I have a very old MSDos version of SPSS-data entry, > > try to install in my new PC which is running Vista. Installation > > procedure is fine, except that when I try to click on > > SPSSDE.EXE, I got a message saying that > > it is not a valid WIN32 application. > > Is there any way that I can make it work? In my other > > older PC, usually, I go to MSDos, then type: > > SPSSPC/DE > > then it will bring up the SPSS data entry screen but > > it doesn't work on this newer PC. > > Thank you very much. > > Linda > -- > View this message in context: http://www.nabble.com/spss-de-1993-version-tp22975704p22975704.html > Sent from the SPSSX Discussion mailing list archive at Nabble.com. > > ===================== > To manage your subscription to SPSSX-L, send a message to > [hidden email] (not to SPSSX-L), with no body text except the > command. To leave the list, send the command > SIGNOFF SPSSX-L > For a list of commands to manage subscriptions, send the command > INFO REFCARD > ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
|
In reply to this post by lscfung
Try running it at the DOS prompt but doubt it will work, especially in Vista
but try Will On 4/9/2009 1:45:04 PM, Ajay ohri ([hidden email]) wrote: > rename the file to pasw.exe > > > > On Thu, Apr 9, 2009 at 10:55 PM, lscfung <[hidden email]> wrote: > > Hi all: > > > > I have a very old MSDos version of SPSS-data entry, > > > > try to install in my new PC which is running Vista. Installation > > > > procedure is fine, except that when I try to click on > > > > SPSSDE.EXE, I got a message saying that > > > > it is not a valid WIN32 application. > > > > Is there any way that I can make it work? In my other > > > > older PC, usually, I go to MSDos, then type: > > > > SPSSPC/DE > > > > then it will bring up the SPSS data entry screen but > > > > it doesn't work on this newer PC. > > > > Thank you very much. > > > > Linda > > -- > > View this message in context: > > Sent from the SPSSX Discussion mailing list archive at Nabble.com. > > > > ===================== > > To manage your subscription to SPSSX-L, send a message to > > [hidden email] (not to SPSSX-L), with no body text except the > > command. To leave the list, send the c ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD
Will
Statistical Services ============ info.statman@earthlink.net http://home.earthlink.net/~z_statman/ ============ |
|
|
In reply to this post by lscfung
For how long do you want to use it? Why don't you try the trial
version of SPSS DE for windows. When I installed it sometime October 2008, it expired January 2009. At 01:25 PM 4/9/2009, lscfung wrote: >Hi all: > > I have a very old MSDos version of SPSS-data entry, > >try to install in my new PC which is running Vista. Installation > >procedure is fine, except that when I try to click on > >SPSSDE.EXE, I got a message saying that > >it is not a valid WIN32 application. > > Is there any way that I can make it work? In my other > >older PC, usually, I go to MSDos, then type: > >SPSSPC/DE > >then it will bring up the SPSS data entry screen but > >it doesn't work on this newer PC. > > Thank you very much. > >Linda >-- >View this message in context: >http://www.nabble.com/spss-de-1993-version-tp22975704p22975704.html >Sent from the SPSSX Discussion mailing list archive at Nabble.com. > >===================== >To manage your subscription to SPSSX-L, send a message to >[hidden email] (not to SPSSX-L), with no body text except the >command. To leave the list, send the command >SIGNOFF SPSSX-L >For a list of commands to manage subscriptions, send the command >INFO REFCARD ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
|
|
In reply to this post by zstatman
Hello dear spsslisters,
I am having a problem viewing my output since I have upgraded to PASW. It appears all chopped up and impossible to read. It is a real problem because I cannot view error messages. Any help to come? Thanks Matt Matthew Pirritano, Ph.D. Research Analyst IV Medical Services Initiative (MSI) Orange County Health Care Agency (714) 568-5648 ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
|
|
I noticed this too. Only the top half of my line of text output shows up
sometimes. It doesn't seem to happen all the time, though... -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Pirritano, Matthew Sent: Thursday, April 09, 2009 2:02 PM To: [hidden email] Subject: Problems with PASW Output Hello dear spsslisters, I am having a problem viewing my output since I have upgraded to PASW. It appears all chopped up and impossible to read. It is a real problem because I cannot view error messages. Any help to come? Thanks Matt Matthew Pirritano, Ph.D. Research Analyst IV Medical Services Initiative (MSI) Orange County Health Care Agency (714) 568-5648 ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ---------------- Defender MX2 - QLAN ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
|
|
In reply to this post by mpirritano
Can you be a bit more descriptive of what you are seeing--I haven't noticed
any difference in the look of things in the viewer window between this update and my previous version. Perhaps it's something to do with specific commands? -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Pirritano, Matthew Sent: Thursday, April 09, 2009 3:02 PM To: [hidden email] Subject: Problems with PASW Output Hello dear spsslisters, I am having a problem viewing my output since I have upgraded to PASW. It appears all chopped up and impossible to read. It is a real problem because I cannot view error messages. Any help to come? Thanks Matt Matthew Pirritano, Ph.D. Research Analyst IV Medical Services Initiative (MSI) Orange County Health Care Agency (714) 568-5648 ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
|
|
In reply to this post by Heidi Green
Hello Matthew and Heidi (and anyone else experiencing this problem)
If you print the output, does the printed output appear garbled and/or truncated as well? If you save the output, close that output file and then reopen it, is the output still garbled or truncated in the viewer? If you click on a garbled or truncated line in the viewer, is that line restored? Does resizing the viewer window change the output (for better or worse)? David Matheson SPSS Statistical Support -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Heidi Green Sent: Thursday, April 09, 2009 4:30 PM To: [hidden email] Subject: Re: Problems with PASW Output I noticed this too. Only the top half of my line of text output shows up sometimes. It doesn't seem to happen all the time, though... -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Pirritano, Matthew Sent: Thursday, April 09, 2009 2:02 PM To: [hidden email] Subject: Problems with PASW Output Hello dear spsslisters, I am having a problem viewing my output since I have upgraded to PASW. It appears all chopped up and impossible to read. It is a real problem because I cannot view error messages. Any help to come? Thanks Matt Matthew Pirritano, Ph.D. Research Analyst IV Medical Services Initiative (MSI) Orange County Health Care Agency (714) 568-5648 ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ---------------- Defender MX2 - QLAN ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
|
|
On Friday, I tried to replicate this problem with no luck. Today it has
been happening a lot. It appears to occur when I have a long section of LOG output that is not broken up by frequencies or charts. The output appears fine until I reach the end of the part that is visible on my screen at any given time. Then when I try to scroll (either using the mouse scroll bar or the scroll bar on the right of the output window), some of the lines are cut in half. Sometimes I see the top half of the line, sometimes the bottom half. Clicking inside the "box" of output just brings me back up to the top, and scrolling back down creates the problem again. (So I can't actually click on the line to see if it is restored). Resizing the output window makes the problem occur in different spots. Closing and re-opening did not clear it up. Double clicking into the output LOG and then scrolling does not help either. The output printed fine, but printing it made me waste 6 pages of paper, so it is not a viable solution to print all my output instead of just looking at it on the screen. I hope this helps to narrow the problem down a bit. I am happy to send a sample of the output to support, but do not want to send it out via the list due to confidentiality. -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of SPSS Support Sent: Thursday, April 09, 2009 3:21 PM To: [hidden email] Subject: Re: Problems with PASW Output Hello Matthew and Heidi (and anyone else experiencing this problem) If you print the output, does the printed output appear garbled and/or truncated as well? If you save the output, close that output file and then reopen it, is the output still garbled or truncated in the viewer? If you click on a garbled or truncated line in the viewer, is that line restored? Does resizing the viewer window change the output (for better or worse)? David Matheson SPSS Statistical Support -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Heidi Green Sent: Thursday, April 09, 2009 4:30 PM To: [hidden email] Subject: Re: Problems with PASW Output I noticed this too. Only the top half of my line of text output shows up sometimes. It doesn't seem to happen all the time, though... -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Pirritano, Matthew Sent: Thursday, April 09, 2009 2:02 PM To: [hidden email] Subject: Problems with PASW Output Hello dear spsslisters, I am having a problem viewing my output since I have upgraded to PASW. It appears all chopped up and impossible to read. It is a real problem because I cannot view error messages. Any help to come? Thanks Matt Matthew Pirritano, Ph.D. Research Analyst IV Medical Services Initiative (MSI) Orange County Health Care Agency (714) 568-5648 ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ---------------- Defender MX2 - QLAN ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ---------------- Defender MX2 - QLAN ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
|
|
When this happens, try print preview to look at the log file.
-----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Heidi Green Sent: Monday, April 13, 2009 2:06 PM To: [hidden email] Subject: Re: Problems with PASW Output On Friday, I tried to replicate this problem with no luck. Today it has been happening a lot. It appears to occur when I have a long section of LOG output that is not broken up by frequencies or charts. The output appears fine until I reach the end of the part that is visible on my screen at any given time. Then when I try to scroll (either using the mouse scroll bar or the scroll bar on the right of the output window), some of the lines are cut in half. Sometimes I see the top half of the line, sometimes the bottom half. Clicking inside the "box" of output just brings me back up to the top, and scrolling back down creates the problem again. (So I can't actually click on the line to see if it is restored). Resizing the output window makes the problem occur in different spots. Closing and re-opening did not clear it up. Double clicking into the output LOG and then scrolling does not help either. The output printed fine, but printing it made me waste 6 pages of paper, so it is not a viable solution to print all my output instead of just looking at it on the screen. I hope this helps to narrow the problem down a bit. I am happy to send a sample of the output to support, but do not want to send it out via the list due to confidentiality. -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of SPSS Support Sent: Thursday, April 09, 2009 3:21 PM To: [hidden email] Subject: Re: Problems with PASW Output Hello Matthew and Heidi (and anyone else experiencing this problem) If you print the output, does the printed output appear garbled and/or truncated as well? If you save the output, close that output file and then reopen it, is the output still garbled or truncated in the viewer? If you click on a garbled or truncated line in the viewer, is that line restored? Does resizing the viewer window change the output (for better or worse)? David Matheson SPSS Statistical Support -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Heidi Green Sent: Thursday, April 09, 2009 4:30 PM To: [hidden email] Subject: Re: Problems with PASW Output I noticed this too. Only the top half of my line of text output shows up sometimes. It doesn't seem to happen all the time, though... -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Pirritano, Matthew Sent: Thursday, April 09, 2009 2:02 PM To: [hidden email] Subject: Problems with PASW Output Hello dear spsslisters, I am having a problem viewing my output since I have upgraded to PASW. It appears all chopped up and impossible to read. It is a real problem because I cannot view error messages. Any help to come? Thanks Matt Matthew Pirritano, Ph.D. Research Analyst IV Medical Services Initiative (MSI) Orange County Health Care Agency (714) 568-5648 ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ---------------- Defender MX2 - QLAN ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ---------------- Defender MX2 - QLAN ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
Re: Problems with PASW Output
|
|
In reply to this post by mpirritano
Hello:
I'm responding to the question below re: SPSS output. Have you tried right-clicking the output you want to view, then edit/separate window? Larry Hotchkiss ------------------------------------------------------------------------------ Hello dear spsslisters, I am having a problem viewing my output since I have upgraded to PASW. It appears all chopped up and impossible to read. It is a real problem because I cannot view error messages. Any help to come? Thanks Matt ------------------------------------------------------------------------------ Larry Hotchkiss University of Delaware IT User Services -- Smith Hall Newark, DE 19716 302-831-1989 [hidden email] ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
|
|
In reply to this post by Heidi Green
Thanks for the additional information, Heidi. A bug has been filed for this problem and a resolution has been entered in the support web site ( http://support.spss.com ). I've pasted the resolution below. ViAnn also suggested viewing the output in Print Preview as a work-around.
David Matheson SPSS Statistical Support Resolution number: 83094 Created on: Apr 10 2009 Last Reviewed on: Apr 10 2009 Problem Subject: Text output is corrupted or not visible within Statistics 17.0.2 Problem Description: I have run a LIST command within my newly patched PASW Statistics 17.0.2 program and now I see strange results in my text output. If I scroll through the data, lines of the output become appear to be partially hidden or truncated. If I try to get around this problem by viewing the output in a separate window, portions of the text will disappear when I click on them. How can I get my text output to display correctly? Resolution Subject: Pending - Workaround Available Resolution Description: This problem has been reported to SPSS Development - Workaround available This issue is concerned with editing large text output objects, either within the Viewer or in a separate window. Ultimately, this becomes a refresh issue. If the output is small enough, it is an easy thing to simply cut and paste into a text editor. Alternatively, you might force a refresh by accessing one of the menus within the active window. for instance, you are scrolling through some LIST output and the text becomes cut in half. Simply accessing the Edit menu should force a refresh and make your text readable once more. The simple act of drawing the menu dropping down, refreshes the rest of the screen. We apologize for this inconvenience. -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Heidi Green Sent: Monday, April 13, 2009 3:06 PM To: [hidden email] Subject: Re: Problems with PASW Output On Friday, I tried to replicate this problem with no luck. Today it has been happening a lot. It appears to occur when I have a long section of LOG output that is not broken up by frequencies or charts. The output appears fine until I reach the end of the part that is visible on my screen at any given time. Then when I try to scroll (either using the mouse scroll bar or the scroll bar on the right of the output window), some of the lines are cut in half. Sometimes I see the top half of the line, sometimes the bottom half. Clicking inside the "box" of output just brings me back up to the top, and scrolling back down creates the problem again. (So I can't actually click on the line to see if it is restored). Resizing the output window makes the problem occur in different spots. Closing and re-opening did not clear it up. Double clicking into the output LOG and then scrolling does not help either. The output printed fine, but printing it made me waste 6 pages of paper, so it is not a viable solution to print all my output instead of just looking at it on the screen. I hope this helps to narrow the problem down a bit. I am happy to send a sample of the output to support, but do not want to send it out via the list due to confidentiality. -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of SPSS Support Sent: Thursday, April 09, 2009 3:21 PM To: [hidden email] Subject: Re: Problems with PASW Output Hello Matthew and Heidi (and anyone else experiencing this problem) If you print the output, does the printed output appear garbled and/or truncated as well? If you save the output, close that output file and then reopen it, is the output still garbled or truncated in the viewer? If you click on a garbled or truncated line in the viewer, is that line restored? Does resizing the viewer window change the output (for better or worse)? David Matheson SPSS Statistical Support -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Heidi Green Sent: Thursday, April 09, 2009 4:30 PM To: [hidden email] Subject: Re: Problems with PASW Output I noticed this too. Only the top half of my line of text output shows up sometimes. It doesn't seem to happen all the time, though... -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Pirritano, Matthew Sent: Thursday, April 09, 2009 2:02 PM To: [hidden email] Subject: Problems with PASW Output Hello dear spsslisters, I am having a problem viewing my output since I have upgraded to PASW. It appears all chopped up and impossible to read. It is a real problem because I cannot view error messages. Any help to come? Thanks Matt Matthew Pirritano, Ph.D. Research Analyst IV Medical Services Initiative (MSI) Orange County Health Care Agency (714) 568-5648 ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ---------------- Defender MX2 - QLAN ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ---------------- Defender MX2 - QLAN ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
right click in syntax (spss v15)
|
|
Hi all-
I've lost the functionality of being able to right click in syntax. For example run highlighted without having to mouse to the top. Anyone else had this problem? The only thing that's changed that I know of is that our company just upgraded to office 2007. Anyway -mainly just venting, but if someone knows why or how to fix it I'd love to. Thanks, Brian Brian Moore Market Research Manager WorldatWork 14040 N. Northsight Blvd. Scottsdale, AZ 85260 USA Tel: 480-304-6832 Fax: 480-483-8352 E-mail: [hidden email] www.worldatwork.org UPCOMING CONFERENCES: Total Rewards 2009 May 31- June 3 | Seattle Total Rewards 2009 Asia Pacific Oct. 7-9 | Hong Kong ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
|
|
Just a guess, but in 15 the syntax editor uses the Microsoft RichEdit control for that Window, and I think MS changed the control. If you don't have the last 15 patch - 15.0.2, I think, that might help.
Regards, Jon Peck -----Original Message----- From: SPSSX(r) Discussion [mailto:[hidden email]] On Behalf Of Brian Moore Sent: Tuesday, April 14, 2009 1:42 PM To: [hidden email] Subject: [SPSSX-L] right click in syntax (spss v15) Hi all- I've lost the functionality of being able to right click in syntax. For example run highlighted without having to mouse to the top. Anyone else had this problem? The only thing that's changed that I know of is that our company just upgraded to office 2007. Anyway -mainly just venting, but if someone knows why or how to fix it I'd love to. Thanks, Brian Brian Moore Market Research Manager WorldatWork 14040 N. Northsight Blvd. Scottsdale, AZ 85260 USA Tel: 480-304-6832 Fax: 480-483-8352 E-mail: [hidden email] www.worldatwork.org UPCOMING CONFERENCES: Total Rewards 2009 May 31- June 3 | Seattle Total Rewards 2009 Asia Pacific Oct. 7-9 | Hong Kong ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD ===================== To manage your subscription to SPSSX-L, send a message to [hidden email] (not to SPSSX-L), with no body text except the command. To leave the list, send the command SIGNOFF SPSSX-L For a list of commands to manage subscriptions, send the command INFO REFCARD |
«
Return to SPSSX Discussion
|
1 view|%1 views
| Free forum by Nabble | Edit this page |